Atoms may be specified in commands using:
In many commands where the specification is the last argument (e.g. color), a blank specification means "all."
In commands where the specification is not necessarily the last argument (e.g. findclash), specifications with embedded spaces should be enclosed in single or double quote marks.
When a plus sign (+) has been typed into the Command Line, it will be replaced by the atom specification string of the next picked atom. Each plus sign must be preceded and followed by a space (or the end of the line). In addition, the following are valid atom specifications:
|BASIC ATOM SPECIFICATION|
|#||model||number assigned to the model by default or by the user with the open command.|
residue sequence number, with any insertion code appended
Each file of coordinates opened in Chimera becomes a model with an associated model ID number. Model numbers are assigned by the user with the open command or sequentially by default. Each model contains one or more residues, and each residue contains one or more atoms with names that are unique within that residue. Thus, an atom can be specified by its model number, residue number, and atom name. The lack of a specifier is interpreted to mean all units of the associated reference level; for example, if a model number is not given, the specification refers to all models.
Residue and atom names are read from the input file. In PDB format, a standard nomenclature is used for standard amino acid and nucleic acid residues. Asterisks (*) in input atom names will be translated to prime symbols ('), but translated back if coordinates are later saved to a file. Prime symbols in input atom names are not translated on input or output.
Model and residue numbers are integers, although a residue number may have an insertion code directly appended. Multiple model numbers or residue numbers may be indicated by comma-separated lists and/or one or more ranges of the form start-end. The words start and end can be substituted for start and end, respectively, and all can be substituted for the whole range (same as no specification at that level).
Residue names and numbers cannot be specified together using a single colon, but both can be specified in a single line by using more than one colon. For example, to specify all residues named HEM and residue 52:
:hem:52 (NOT :hem,52)More examples:
#0- all atoms in model 0
#3:45-83,90-98- residues 45-83 and 90-98 in model 3
#0:12@CA,N- alpha carbon and nitrogen of residue 12 in model 0
:12,14@CA- alpha carbons of residues 12 and 14
:12:14@CA- all atoms of residue 12 and alpha carbon of residue 14
:12-20@CA:14@N- alpha carbons of residues 12-20 and nitrogen of residue 14
:lys- all lysine residues
- or -
In some cases, the basic notations cannot uniquely specify the model, residue, or atom of interest:
|#model(s).submodel(s)||when a single PDB file contains multiple MODELs, they are considered submodels 1, 2, ... of a single model in Chimera|
|:residue(s).chain(s)||when a single model contains multiple chains, a unique specification includes both residue number and chain identifier|
|@atom(s).altloc(s)||when a single residue contains alternate locations of certain atoms, an independent specification includes both atom name and alternate location identifier|
Submodel(s) are integers and may be indicated by a single value or a range of the form start-end. The words start and end can be substituted for start and end, respectively, and all can be substituted for the whole range (same as no submodel specification).
Chain(s) and altloc(s) are alphabetical characters. Any residue in PDB HETATM records (or the mmCIF equivalent) that does not already have a chain identifier is assigned to chain het, unless the residue is named WAT or HOH, in which case it is assigned to chain water; residue numbers are unchanged. (See also the residue attribute isHet.)
Capitalization of residue and atom names, chain identifiers, insertion codes, or alternate location identifiers is not important, with one exception: when a model contains both uppercase and lowercase chain identifiers, case matters for chain specification in that model only.
Subcategorizations are appended to the basic specification. The symbol for the relevant category (#, :, or @) must precede the subcategory specification, although they need not be immediately adjacent. Because commas are used only to separate values of the basic reference levels (model, residue, and atom), they cannot be used to separate values of the sublevels directly. For example,
#0.1-3,5is interpreted as submodels 1-3 of model 0 and all of model 5, while
#0.1-3,.5indicates submodels 1-3 of model 0 and submodel 5 of all models.
A subcategory specification applies only to the preceding category value(s) not separated from it by any commas. Thus,
:50.B,.Dindicates residue 50 in chain B and all residues in chain D;
:12-15,26-28.a,45.b@caspecifies CA atoms in residues 12-15 in all chains (except the special chains het and water), 26-28 in chain A, and 45 in chain B. The following specifies residues 12-15 in no-ID chains only:
:.b- chain B
:.a@n,ca,c,o- peptide backbone atoms in chain A
:195.a,221.a@n,ca,c,o- peptide backbone atoms in residues 195 and 221 of chain A
:522.water- water residue 522 (a HETATM residue named HOH or WAT without a chain ID in the input file)
@.a- all atoms with alternate location identifier A
The global wild card * matches all atoms in a residue or all residues in a model. It stands alone as a symbol, that is, it cannot be used to match parts of names, such as G* or *A. The partial wild card = matches parts of atom or residue names but not parts of residue sequence numbers; similarly, the single-character wild card ? matches single characters within residue or atom names but not single digits within residue sequence numbers. For example:
#1:12@*- all atoms in residue 12 of model 1
- or -
#0,1,2:50-*@CA- all alpha carbon atoms in residues 50 to the end of models 0, 1 and 2
#2:G??- all residues which have three-letter names beginning with G in model 2
:fmn@?1- atoms within residue FMN which have two-letter names ending with 1
@S=- all atoms which have names beginning with S; in general, this will be all sulfur atoms
#0@H@H?@H??- all atoms with one-, two-, or three-letter names beginning with H in model 0
Zone specifiers indicate atoms and residues that are within or beyond a given distance of the referenced atom(s). z< and zr< specify all residues with any atom within the given distance from the referenced atoms. za< specifies all atoms within the given distance. z>, zr>, and za> yield the sets complementary to their < counterparts. For example,
#1:gtp za<10.5specifies all atoms within 10.5 Å of any atom in residue GTP, model 1.
Zone specifiers refer to atoms only, not surfaces; however, the command zonesel allows basing zones on surfaces and including surfaces in zones.
Any of the entries in the following sections of the Select menu can be used for command-line atom specification:
One can also use custom amino acid categories that have been defined with ResProp and custom categories for surface calculation that have been defined with the command msms cat (surfcat). If a saved selection has the same name as a surface category, the saved selection will be used.
side chain/base.without CA/C1'- atoms in amino acid side chains (not including CA) and atoms in nucleic acid bases (not including C1')
- or -
#1 & Mg- magnesium atoms/ions in model 1
helix & positive- residues in helices that are also in the positive amino acid category
carboxylate- atoms in carboxylate groups
solvent- atoms automatically categorized as solvent
Attributes are properties of atoms, residues and models. The slash mark / indicates specification by attribute name and value. The symbol for the relevant category (@ for atom attributes, : for residue attributes, # for model attributes) must precede the slash mark, although it need not be immediately adjacent.
Multiple attributes at the same reference level (different atom properties, for example) can follow a single slash mark and should be separated by and or or. When and and or occur in the same list, and has higher priority (and-separated lists can be considered as grouped within parentheses).
The attribute names are case-sensitive; the attribute values, if any, are case-sensitive if specified with ==, but not if specified with =. Attribute values containing spaces (some color names, for example) must be enclosed by double quotes. The exclamation mark ! indicates that the atoms, residues, or models must not match the subsequent attribute specification. For yes/no properties the syntax is !attribute_name, and for multivalued properties the syntax is attribute_name!=value.
Attributes with numerical values can also be used with > (greater than), < (less than), >= (greater than or equal to), and <= (less than or equal to).
Color values can be specified:
The operators ~ and !~ can be used instead of = and !=, respectively, to indicate that the subsequent string should be treated as a regular expression.
|SELECTED ATOM ATTRIBUTES **|
|Name and Usage||Explanation|
|altLoc=altloc||altloc is the alternate location identifier of the atom|
|areaSAS=sasa||sasa is the solvent-accessible surface area of the atom (available when a molecular surface has been computed)|
|areaSES=sesa||sesa is the solvent-excluded surface area of the atom (available when a molecular surface has been computed)|
|bfactor=bfactor||bfactor is the B-factor value of the atom (see also Thermal Ellipsoids)|
|color=color||color is the color of the atom (assigned on a per-atom basis; see coloring hierarchy)|
|defaultRadius=rad||rad is the default VDW radius of the atom in Å|
|display||whether display is enabled at the atom level (see display hierarchy)|
|drawMode=mode||mode can be 0 (synonyms: dot, wire, wireframe), 1 (sphere, cpk, space-filling), 2 (endcap, stick), or 3 (ball, ball and stick, ball-and-stick, ball+stick, bs, b+s); see draw mode|
|element=atno||atno is the atomic number|
|idatmType=type||type is the atom type|
|label||whether the atom is labeled|
|label=label||label is the text of the atom label|
|labelColor=labcolor||labcolor is the color of the atom label|
|name=name||name is the atom name|
|occupancy=occupancy||occupancy is the occupancy value of the atom|
|radius=radius||radius is the current VDW radius of the atom in Å (may have been changed by the user from the default VDW radius)|
|serialNumber=n||n is the atom serial number in the input file|
|surfaceCategory=category||category is the name of the surface calculation category to which the atom has been assigned automatically or manually using surfcat|
|surfaceDisplay||whether molecular surface display is turned on for the atom (however, this can be true even for atoms that do not contribute to the molecular surface)|
@ca/!label and color!=green and color!=red- atoms named CA which are not labeled, and are not green or red
- or -
@/name=ca and !label and color!=green and color!=red
@n/drawMode=1 and color=green- atoms named N that are green and drawn as spheres
@n/drawMode=1 or color=green- atoms named N that are green and/or drawn as spheres
@/color=yellow or color=blue and label- atoms that are yellow and atoms that are both blue and labeled
@/color!=yellow or color!=blue- all atoms, because if an atom is yellow it fulfills the criterion of not being blue, and vice versa
@/bfactor>=50- atoms with B-factor values greater than or equal to 50
@/bfactor>=20 and bfactor<=40- atoms with B-factor values ranging from 20 to 40
|SELECTED RESIDUE ATTRIBUTES **|
|Name and Usage||Explanation|
|areaSAS=sasa||sasa is the solvent-accessible surface area of the residue (available when a molecular surface has been computed)|
|areaSES=sesa||sesa is the solvent-excluded surface area of the residue (available when a molecular surface has been computed)|
|isHelix||whether the residue is in a helix (true is only possible for amino acids)|
|isHet||whether the residue is in PDB HETATM records (or the mmCIF equivalent)|
|whether the residue is in a beta strand (true is only possible for amino acids)|
|kdHydrophobicity=value||value is the Kyte-Doolittle hydrophobicity of the amino acid residue|
|numAtoms=N||N is the total number of atoms in the residue|
|phi=angle||angle is the protein/peptide backbone φ dihedral angle (Ci-1-N-CA-C)|
|psi=angle||angle is the protein/peptide backbone ψ dihedral angle (N-CA-C-Ni+1)|
|ribbonColor=ribcolor||ribcolor is the color of the residue's ribbon segment (see coloring hierarchy)|
|ribbonDisplay||whether ribbon display is turned on for the residue (however, this can be true even when the residue is a type that does not have any ribbon, such as water)|
|ssId=N||N is the secondary structure element identifier, for example, 1 for residues in the first helix and first strand (starting from the N-terminus)|
|type=resname||resname is the residue name|
|uniprotIndex=N||N is the residue number in the corresponding UniProt sequence (discerned from HEADER and SEQRES information in the structure PDB file using a web service provided by the RCSB PDB)|
Helix and strand assignments are taken from the input structure file. When the input file lacks secondary structure information, ksdssp is called automatically to generate helix and strand assignments. The ksdssp command (or compute SS in the Model Panel) can also be used to recompute assignments.
:/type!=gly and type!=pro- all residues not named GLY or PRO
:/isStrand :/isHelix- all amino acid residues in beta strands or helices
- or -
:/isStrand or isHelix
:/isStrand and isHelix- nothing, because the criteria are mutually exclusive
|SELECTED MOLECULE MODEL ATTRIBUTES **|
|Name and Usage||Explanation|
|ballScale=factor||factor is ball radius relative to VDW radius|
|color=color||color is the color assigned on a per-model basis (see coloring hierarchy)|
|display||whether display is enabled at the model level (see display hierarchy)|
|lineWidth=width||width is the linewidth of bonds in the model in the wire representation|
|numAtoms=N||N is the total number of atoms in the model|
|numResidues=M||M is the total number of residues in the model|
|ribbonInsideColor=color||color is the color used for the insides of peptide/protein helix ribbon segments|
|stickScale=factor||factor is stick radius relative to bond radius (the default bond radius is 0.2 Å)|
**Additional attributes can be created:
The preceding tables [atoms] [residues] [molecule models] include the names of some commonly used attributes. More obscure attributes are omitted, but more importantly, the tables are incomplete because some attributes may be generated only when a particular tool is used, or created arbitrarily by the user.
Name lookup in Chimera:
help(chimera.Class)where Class can be Atom, Residue, or Molecule. This approach also works for Bond, PseudoBond, and PseudoBondGroup. Attributes defined in the Python layer will not be included, however.
Atom specifications can be combined with the operators:
Note that a different set of operators (and, or, !, etc.) are used to combine attribute tests; however, both types of operators can be used within the same specification.
#1:/type=asp or type=glu & #0 z<10- aspartate residues and glutamate residues in model 1 that are within 10 Å of model 0
- or -
#1:asp,glu & #0 z<10
:cys@sg & ~disulfide- cysteine sulfur atoms not participating in a disulfide bond
- or -
ions za<4 & ~ ions- atoms within 4 Å of atoms categorized as ions, excluding the ions themselves
ligand z<5 &~ ligand &~ solvent- residues with any atoms within 5 Å of residues categorized as ligand, excluding ligand and solvent
Ng+|N3+- guanidinium nitrogens and sp3-hybridized, formally positive nitrogens (see atom types)
Some commands can apply to things other than molecule models (atomic coordinates) and molecular surfaces. To handle such cases, "atom specification" has been extended as follows: